LMT30400 Certificate III in Textile Fabrication
Qualification: Certificate III (AQF)
Training Package: LMT00 Textiles, Clothing And Footwear
TAFE NSW Course No: 7666
This course teaches you the skills needed to safely work in the textile fabrication industry. The course allows you to combine on-the-job with off-the-job training.
You will learn about different areas of the textile fabrication industry, such as production operations, machine maintenance, warehousing and distribution, frontline management and workplace training and assessment.
The course is made up of core and elective modules. You must complete at least seventeen elective modules to receive the qualification. You will need access to plant and equipment to complete some of the modules in this course.
Career Opportunities: Sail maker, textile product fabricator.
Entry Requirements: There are no formal educational requirements for entry to this course. Entry may be direct or following successful completion of LMT10300 Certificate I in Textile Fabrication, TAFE course no: 7664 or LMT20500 Certificate in Textile Fabrication), TAFE course no: 7665. Certain modules require access to industry specific plant and equipment. Trainees must be registered as Trainees under the National Apprenticeship System (NAS) or equivalent traineeship system.
| Competency Units | |
| BSXFMI304A | Participate in, lead and facilitate work teams |
| BSXFMI305A | Manage operations to achieve planned outcomes |
| BSXFMI309A | Implement and monitor continuous improvements to systems and processes |
| BSZ402A | Conduct assessment |
| BSZ404A | Train small groups |
| LMTEMGN08A | Perform minor maintenance |
| LMTHRGN01A | Perform one-on-one training on the job |
| LMTHRGN02A | Work in a team environment |
| LMTHRGN08A | Follow defined OH&S policies and procedures |
| LMTPDTF01AA | Translate information into measurements and/or diagrams - 1 |
| LMTPDTF01BA | Translate information into measurements and/or diagrams - 2 |
| LMTPDTF02AA | Measure, scale and undertake geometric construction - 1 |
| LMTPDTF02BA | Measure, scale and undertake geometric construction - 2 |
| LMTPDTF03AA | Produce patterns for two dimensional products |
| LMTPDTF03BA | Produce patterns for three dimensional products |
| LMTPDTF04AA | Identify customer requirements (on site) |
| LMTPDTF04BA | Identify customer requirements and gain customer acceptance |
| LMTPDTF05A | Estimate and cost job |
| LMTPRGN12A | Control production |
| LMTPRGN15A | Coordinate work of team/section |
| LMTPRGN16A | Organise and plan own work to achieve planned outcomes |
| LMTPRTF01AA | Identify and handle materials |
| LMTPRTF01BA | Identify and select materials - 1 |
| LMTPRTF01CA | Identify and select materials - 2 |
| LMTPRTF02AA | Lay out |
| LMTPRTF02BA | Lay out and/or mark out - 1 |
| LMTPRTF02CA | Lay out and/or mark out - 2 |
| LMTPRTF03AA | Cut and shape - 1 |
| LMTPRTF03BA | Cut and shape - 2 |
| LMTPRTF04AA | Stitch by hand - 1 |
| LMTPRTF04BA | Stitch by hand - 2 |
| LMTPRTF05AA | Operate and maintain sewing machine - 1 |
| LMTPRTF05BA | Operate and maintain sewing machine - 2 |
| LMTPRTF05CA | Operate and maintain sewing machine - 3 |
| LMTPRTF06AA | Weld plastic materials - 1 |
| LMTPRTF06BA | Weld plastic materials - 2 |
| LMTPRTF06CA | Weld plastic materials - 3 |
| LMTPRTF07AA | Add reinforcements and attachments - 1 |
| LMTPRTF07BA | Add reinforcements and attachments - 2 |
| LMTPRTF08AA | Add accessories - 1 |
| LMTPRTF08BA | Add accessories - 2 |
| LMTPRTF09AA | Use adhesives - 1 |
| LMTPRTF09BA | Use adhesives - 2 |
| LMTPRTF10AA | Install products on and off site - 1 |
| LMTPRTF10BA | Install products on and off site - 2 |
| LMTPRTF11AA | Waterproof canvas products - 1 |
| LMTPRTF11BA | Waterproof canvas products - 2 |
| LMTPRTF12AA | Cut, bend and shape metals - 1 |
| LMTPRTF12BA | Cut, bend and shape metals - 2 |
| LMTPRTF13A | Use power tools |
| LMTPRTF14A | Use hand tools |
Applying and Enrolling:
Campuses:
Coffs Harbour - For trainees.
Contact the Head Teacher, Trish Field on (02) 6648 2400 to discuss enrolling in this course.
Port Macquarie - For trainees. Part-time day.
Contact the Head Teacher, Jill Woodlands on (02) 6581 6200 for more information.
Wollongbar - For Trainees. Customised on-the-job and off-the-job training. Contact Marianne Wade on (02) 6620 4700 to discuss enrolling in this course.
