AUR30705 Certificate III in Outdoor Power Equipment
Qualification: Certificate III (AQF)
Training Package: AUR05 Automotive Industry Retail, Service and Repair
TAFE Course No: 17391
Nominal Hours: 864
In this course you will learn how to service and repair the mechanical, electrical and ancilliary systems of outdoor power equipment. It is a pathway to a traineeship in the outdoor power equipment sector of the automotive industry.
Career Opportunities: Successful completion of this course would enable you to be employed as a mechanic in the outdoor power equipment sector of the automotive industry.
Articulation: Successful completion of this course will achieve units of competence from the Automotive Industry Retail, Service and Repair Training Package AUR05. This qualification, and the units, will be recognised in other Certificate III course such as the AUR30405 Certificate III in Automotive Mechanical Technology (Light Vehicel), TAFE course no: 9003 and the AUR30405 Certificate III in Automotive Mechanical Technology (Motorcycle), TAFE course no: 5614.
Entry Requirements: There are no formal educational requirements for this course. The learner must be employed as a trainee in the outdoor power equipment industry to be able to gain sufficient experience to achieve the unit of competence requirements.
| Modules/Units | |
| Core: | |
| AURC270103A | Apply safe working practices |
| AURE218676A | Test, service and charge batteries |
| AURE218708A | Carry out repairs to single electrical circuits |
| AURE222976A | Test and service outdoor powered equipment |
| AURP201570A | Service engines and associated engine components (outdoor power equipment) |
| AURP245171A | Service and repair faults in rotary cutting systems |
| AURP245271A | Service and repair faults in drum cutting systems |
| AURP245371A | Service and repair chainsaw cutting systems |
| AURP245771A | Service and repair faults in reciprocating cutting systems |
| AURP301566A | Repair engines and associated engine components (outdoor power equipment) |
| AURT270278A | Use and maintain workplace tools and equipment |
| AURT271781A | Implement and monitor environmental regulations in the automotive mechanical industry |
| AURT366108A | Carry out diagnostic procedures |
| Elective: | |
| 8999A | Tutorial support |
| AURC270421A | Establish relationships with customers |
| AURC270789A | Communicate effectively in the workplace |
| AURE219531A | Install ancillary electrical components |
| AURE220140A | Manufacture and repair wiring harness/looms |
| AURE318866A | Repair electrical systems |
| AURE319166A | Repair charging systems |
| AURE319266A | Repair starting systems |
| AURE320666A | Repair ignition systems |
| AURE321066A | Repair electronic systems |
| AURE321171A | Service and repair electronic spark ignition engine management systems |
| AURP245465A | Remove, fit and adjust line trimming system components |
| AURP245571A | Service and repair faults in post-boring systems |
| AURP245671A | Service and repair faults in post hole digging systems |
| AURP322776A | Test and service 240V portable generators |
| AURP347666A | Repair pumping systems |
| AURP401245A | Overhaul engines and associated engine components (outdoor power equipment) |
| AURT200108A | Carry out servicing operations |
| AURT200368A | Select and use bearings, seals, gaskets, sealants and adhesives |
| AURT201170A | Inspect and service engines |
| AURT202166A | Repair cooling systems |
| AURT202170A | Inspect and service cooling systems |
| AURT203170A | Service petrol fuel systems |
| AURT203670A | Service diesel fuel injection systems |
| AURT209170A | Service hydraulic systems |
| AURT210170A | Inspect and service braking systems |
| AURT213170A | Service final drive (driveline) |
| AURT215170A | Inspect and service steering systems |
| AURT225667A | Use and maintain measuring equipment |
| AURT237271A | Service and repair trailers |
| AURT301383A | Dismantle, assemble and repair engine block and sub-assemblies |
| AURT303166A | Repair petrol fuel systems |
| AURT303666A | Repair diesel fuel systems |
| AURT306170A | Inspect, service and/or repair clutch assemblies and associated operating system components |
| AURT306666A | Repair transmissions (manual) |
| AURT307166A | Repair transmissions (automatic) |
| AURT308166A | Repair transmissions (hydrostatic) |
| AURT301383A | Dismantle, assemble and repair engine block and sub-assemblies |
| AURT303166A | Repair petrol fuel systems |
| AURT303666A | Repair diesel fuel systems |
| AURT306170A | Inspect, service and/or repair clutch assemblies and associated operating system components |
| AURT306666A | Repair transmissions (manual) |
| AURT307166A | Repair transmissions (automatic) |
| AURT308166A | Repair transmissions (hydrostatic) |
| AURT309131A | Install hydraulic systems to specific applications |
| AURT309140A | Manufacture and install fluid power hose assemblies |
| AURT310166A | Repair hydraulic braking systems |
| AURT312666A | Repair final drive assemblies |
| AURT313166A | Repair final drive (driveline) |
| AURT315166A | Repair steering systems |
| AURT366308A | Carry out advanced diagnostic procedures |
| AURT406645A | Overhaul transmissions (manual) |
| AURT409166A | Repair hydraulic systems |
| AURV231649A | Prepare vehicle/component/equipment for customer use |
| WRR15A | Maintain and Order Stock |
Applying and enrolling: Stage 1 only available.
Campuses:
Coffs Harbour - For apprentices or trainees.
Part-time day, 8 hours per week for 36 weeks, Friday 8.00 am to 5.00 pm. Individual arrangements can be negotiated to suit students and employers.
Contact the Head Teacher, Garrie Crossingham on (02) 6648 2400 to discuss enrolling in this course.
Kempsey -
Stage 1 only. For apprentices and trainees only.
Flexible delivery.
Stage 2 & 3 offered at Glendale, Newcastle over 2 years.
Contact the Head Teacher, Michael Brenton on (02) 6560 2900 to discuss enrolling in this course.
Murwillumbah - Apprentices only.
Part-time day, 8 hours (1 day) per week for 3 years.
Contact the Head Teacher, Len Parkes on (02) 6672 0800 to discuss enrolling in this course.
Taree - For apprentices and trainees.
Contact the Head Teacher, Brenton Kotz on (02) 6591 3600 to discuss enrolling in this course.
