AUR30405 Certificate III in Automotive Mechanical Technology (Motor Cycle)
Qualification: Certificate III (AQF)
Training Package: AUR05 Automotive Industry Retail, Service and Repair
TAFE Course No: 5614
Nominal Hours: 864
This course is for people working in the automotive industry who want a career as a motorcycle mechanic and have entered into a training agreement. You will learn how to service and repair motorcycles and how to service, repair and diagnose faults in motorcycle engines, transmissions, brakes, suspension, steering and electrical systems and components.
Career Opportunities: Successful completion of this course, with the relevant work experiences, would enable you to be employed as a mechanic in the motorcycle industry.
Articulation: Successfful completion of this course will achieve units of competency from the Automotive Retail Service and Repair Training Package (AUR05). This qualification and the units will be recognised in other Certificate III and Certificate IV courses such as the 9003 Certificate III in Automotive Mechanical Technology (Light Vehicle) and the 9004 Certificate IV in Automotive Technology (Mechanical) .
Entry Requirements: There are no formal educational requirements for this course. The learner must be employed as an apprentice in the motorcycle industry to be able to gain sufficient experience to achieve the units of competence requirements.
| Modules/Units | |
| Core: | |
| AURC270103A | Apply safe working practices |
| AURE218676A | Test, service and charge batteries |
| AURE218708A | Carry out repairs to single electrical circuits |
| AURE320666A | Repair ignition systems |
| AURE321171A | Service and repair electronic spark ignition engine management systems |
| AURT202166A | Repair cooling systems |
| AURT217665A | Remove, fit and inspect wheel assemblies |
| AURT271781A | Implement and monitor environmental regulations in the automotive mechanical industry |
| AURT301166A | Repair engines and associated engine components |
| AURT303166A | Repair petrol fuel systems |
| AURT304666A | Repair and replace emission control systems |
| AURT306170A | Inspect, service and/or repair clutch assemblies and associated operating system components |
| AURT306666A | Repair transmissions (manual) |
| AURT310166A | Repair hydraulic braking systems |
| AURT312666A | Repair final drive assemblies |
| AURT313166A | Repair final drive (driveline) |
| AURT315166A | Repair steering systems |
| AURT316166A | Repair suspension systems |
| AURT366108A | Carry out diagnostic procedures |
| AURV328166A | Repair and align motor cycle frames |
| Elective: | |
| 8999A | Tutorial support |
| AURC270789A | Communicate effectively in the workplace |
| AURE218664A | Remove and replace electrical/electronic units/assemblies |
| AURE219331A | Install, test and repair low voltage wiring/lighting systems |
| AURE219531A | Install ancillary electrical components |
| AURE220140A | Manufacture and repair wiring harness/looms |
| AURE224008A | Carry out soldering of electrical wiring/circuits |
| AURE318866A | Repair electrical systems |
| AURE318966A | Repair instruments and warning systems |
| AURE319166A | Repair charging systems |
| AURE319266A | Repair starting systems |
| AURE321066A | Repair electronic systems |
| AURE321471A | Service and repair electronically controlled anti-lock braking systems |
| AURT200108A | Carry out servicing operations |
| AURT200368A | Select and use bearings, seals, gaskets, sealants and adhesives |
| AURT201164A | Remove and install engine assemblies |
| AURT201170A | Inspect and service engines |
| AURT202170A | Inspect and service cooling systems |
| AURT203170A | Service petrol fuel systems |
| AURT204670A | Inspect and service emission control systems |
| AURT205123A | Fabricate exhaust systems/components |
| AURT205166A | Repair exhaust system components |
| AURT206670A | Inspect and service transmissions (manual) |
| AURT207170A | Inspect and service transmissions (automatic) |
| AURT210170A | Inspect and service braking systems |
| AURT212670A | Service final drive assemblies |
| AURT213165A | Remove and refit driveline components |
| AURT213170A | Service final drive (driveline) |
| AURT215170A | Inspect and service steering systems |
| AURT216170A | Inspect and service suspension systems |
| AURT210170A | Inspect and service braking systems |
| AURT212670A | Service final drive assemblies |
| AURT213165A | Remove and refit driveline components |
| AURT213170A | Service final drive (driveline) |
| AURT215170A | Inspect and service steering systems |
| AURT216170A | Inspect and service suspension systems |
| AURT217108A | Carry out wheel alignment operations |
| AURT217606A | Balance wheels and tyres |
| AURT217766A | Remove, inspect, repair and fit tyres and tubes (light) |
| AURT217865A | Remove and refit wheel hubs and associated brake components |
| AURT270278A | Use and maintain workplace tools and equipment |
| AURT301357A | Rebuild engine components |
| AURT301383A | Dismantle, assemble and repair engine block and sub-assemblies |
| AURT301483A | Recondition cylinder heads |
| AURT305671A | Inspect and repair engine forced induction systems |
| AURT307166A | Repair transmissions (automatic) |
| AURT310104A | Assemble and fit braking systems/components |
| AURT316316A | Determine compliance of steering and suspension modifications |
| AURT317172A | Reset steering system alignment adjustments to customer specifications |
| AURT318054A | Provide advice on the effects of wheel and tyre combinations |
| AURT334608A | Carry out blueprinting of engine components |
| AURT334708A | Carry out reboring and honing of cylinders |
| AURT366308A | Carry out advanced diagnostic procedures |
| AURT401145A | Overhaul engines and associated engine components |
| AURT403145A | Overhaul petrol fuel system components |
| AURT406645A | Overhaul transmissions (manual) |
| AURT407145A | Overhaul transmissions (automatic) |
| AURT410145AA | Overhaul braking system components (light) |
| AURT412645A | Overhaul final drive assemblies |
| AURT415145A | Overhaul steering system components |
| AURV231649A | Prepare vehicle/component/equipment for customer use |
Applying and enrolling: Stage 1 only available.
Campuses:
Coffs Harbour - For apprentices and trainees.
Stage 1 only. (Stage 2 & 3 are offered by block release through Kempsey Campus).
Part-time day 8 hours per week for 36 weeks, Fridays, 8.00 am - 5.00 pm. Individual arrangements can be negotiated to suit students and employers.
Contact the Head Teacher, Garrie Crossingham on (02) 6648 2400 to discuss enrolling in this course.
Please note: This course will be offered at the Coffs Harbour Education Campus from Semester 1 2009.
Kempsey - Stage 1 only. For apprentices and trainees.
Flexible delivery.
Contact the Head Teacher, on Michael Brenton (02) 6560 2900 to discuss enrolling in this course.
Murwillumbah - Stage 1 apprentices only. (Stage 2 & 3 are offered by block release through Kempsey Campus).
Part-time day, 8 hours (1 day) per week for 1 year.
Contact the Head Teacher, Len Parkes on (02) 6672 0800 to discuss enrolling in this course.
Information Sheet, Murwillumbah, Semester 1 2009 (PDF 244KB)
Taree - Stage 1 only. (Stage 2 & 3 are offered by block release through Kempsey Campus).
Part-time day or flexible.
Contact the Head Teacher, Brenton Kotz on (02) 6591 3600 to discuss enrolling in this course.
Wollongbar - Stage 1 only.
Flexible Delivery. Part-time day (Stage 2 & 3 are offered by block release through Kempsey Campus).
Contact the Head Teacher, Dennis McInnes on (02) 6620 4700 to discuss enrolling in this course.
