AUR30605 Certificate III in Automotive Specialist (Fork Lift Mechanical)
Qualification: Certificate III (AQF)
Training Package:
AUR05 Automotive Industry Retail, Service and Repair
TAFE NSW Course No: 5791
This qualification is for apprentice forklift maintenace mechanics in the industrial lift truck (forklift) service industry. You will work on industrial lift truck (forklift) equipment. You will learn how the various systems operate, and will learn how to maintain, test, diagnose, and repair those systems and components.
Career Opportunities: Forklift maintenance mechanic in the industrial lift truck industry.
Articulation: You may be eligible for advanced standing in this qualification if you have successfully completed any units of competence from Certificate II or Certificate III courses that form part of this course.
Entry Requirements: There are no formal educational requirements for this qualification. The learner must be employed or have access to a workplace in the forklift service and repair industry to be able to gain sufficient experience to successfully complete the unit of competence requirements.
| Modules/Units | |
| Core: | |
| AURC270103A | Apply safe working practices |
| AURT271781A | Implement and monitor environmental regulations in the automotive mechanical industry |
| AURT366108A | Carry out diagnostic procedures |
| AURT300771A | Inspect, service and repair lift truck mast assemblies |
| AURT309131A | Install hydraulic systems to specific applications |
| AURT409166A | Repair hydraulic systems |
| Elective: | |
| AURC270789A | Communicate effectively in the workplace |
| AURE218676A | Test, service and charge batteries |
| AURE218708A | Carry out repairs to single electrical circuits |
| AURE219331A | Install, test and repair low voltage wiring/lighting systems |
| AURE219531A | Install ancillary electrical components |
| AURE220140A | Manufacture and repair wiring harness/looms |
| AURE224008A | Carry out soldering of electrical wiring/circuits |
| AURT200108A | Carry out servicing operations |
| AURT200368A | Select and use bearings, seals, gaskets, sealants and adhesives |
| AURT201170A | Inspect and service engines |
| AURT202166A | Repair cooling systems |
| AURT202170A | Inspect and service cooling systems |
| AURT203170A | Service petrol fuel systems |
| AURT203670A | Service diesel fuel injection systems |
| AURT204670A | Inspect and service emission control systems |
| AURT205166A | Repair exhaust system/components |
| AURT206670A | Inspect and service transmissions (manual) |
| AURT207170A | Inspect and service transmissions (automatic) |
| AURT208170A | Service transmissions (hydrostatic) |
| AURT209170A | Service hydraulic systems |
| AURT210170A | Inspect and service braking systems |
| AURT211170A | Inspect and service air braking systems |
| AURT212670A | Service final drive assemblies |
| AURT213165A | Remove and refit driveline components |
| AURT213170A | Service final drive (driveline) |
| AURT215170A | Inspect and service steering systems |
| AURT216170A | Inspect and service suspension systems |
| AURT217108A | Carry out wheel alignment operations |
| AURT217606A | Balance wheels and tyres |
| AURT217865A | Remove and refit wheel hubs and associated brake components |
| AURT217966A | Remove, inspect, repair and fit tyres and tubes (heavy) |
| AURT225667A | Use and maintain measuring equipment |
| AURT270278A | Use and maintain workplace tooling and equipment |
| AURV232165A | Remove, replace, fit and test components/accessories |
| AURV281408A | Carry out gas tungsten arc (TIG) welding procedures |
| HLTFA1A | Apply basic First Aid |
| MEM5.50B | Perform routine gas metal arc welding |
| MEM5.7AB | Manual heating and thermal cutting |
| AURE318866A | Repair electrical systems |
| AURE318966A | Repair instruments and warning systems |
| AURE319166A | Repair charging systems |
| AURE319266A | Repair starting systems |
| AURE320666A | Repair ignition systems |
| AURE321066A | Repair electronic systems |
| AURP347666A | Repair pumping systems |
| AURT301166A | Repair engines and associated engine components |
| AURT303166A | Repair petrol fuel systems |
| AURT303666A | Repair diesel fuel systems |
| AURT304270A | Service LPG fuel systems |
| AURT304370A | Service CNG fuel systems |
| AURT304470A | Service LNG fuel systems |
| AURT304666A | Repair and replace emission control systems |
| AURT306170A | Inspect, service and/or repair clutch assemblies and associated operating system components |
| AURT306666A | Repair transmissions (manual) |
| AURT308166A | Repair transmissions (hydrostatic) |
| AURT309140A | Manufacture and install fluid power hose assemblies |
| AURT310166A | Repair hydraulic braking systems |
| AURT311166A | Repair air braking systems |
| AURT312666A | Repair final drive assemblies |
| AURT313166A | Repair final drive (driveline) |
| AURT315166A | Repair steering systems |
| AURT316166A | Repair suspension systems |
| AURT334972A | Set, operate and monitor specialist machines |
| AURT401145A | Overhaul engines and associated engine components |
| AURT406645A | Overhaul transmissions (manual) |
| AURT407145A | Overhaul transmissions (automatic) |
| AURT410145BA | Overhaul braking system components (heavy) |
| AURT411145A | Overhaul air braking systems/components |
| AURT412645A | Overhaul final drive assemblies |
| AURT415145A | Overhaul steering system components |
| 8999A | Tutorial support |
 |
|
Applying and Enrolling:
Campuses:
Coffs Harbour - For Apprentices and trainees.
Stage 1 only.
Part-time day over 3 years.
Contact the Head Teacher Garrie Crossingham on (02) 6648 2400 to discuss enrolling in this course.
Please note: This course will be offered at the Coffs Harbour Education Campus from Semester 1 2009.
Wollongbar - For Apprentices and trainees.
Part-time day over 3 years.
Contact the Head Teacher, Dennis McInnes on (02) 6620 4700 to discuss enrolling in this course.
