TDM30101 Certificate III in Transport and Distribution (Maritime Operations) - Master Class V course
Qualification: Certificate III (AQF)
Training Package: TDM01 Maritime
TAFE NSW Course No: 8165
This course is for people who want to command a commercial vessel of less than 24 metres.
You will learn how to take charge of a commercial vessel of less than 24 metres operating offshore within 100 nautical miles. Evidence of sea time/service on board a vessel will be required to obtain a certificate of competency from the state regulatory authority.
Career Opportunities: The next career step for a person with this qualification is to become a master class 4. This career option is available upon gaining further sea experience and undertaking an additional course - TDM40101 Certificate IV in Transport and Distribution (Maritime Operations), TAFE course no: 8166.
Articulation: When you finish this course you may be able to apply for advanced standing in TDM40101 Certificate IV in Transport and Distribution (Maritime Operations), TAFE NSW course no: 8166.
Entry Requirements: TDM10101 Certificate I in Transport and Distribution (Maritime Operations) or TDM20101 Certificate II in Transport and Distribution (Maritime Operations) or successful completion of a Certificate of Competency as Coxswain plus evidence of experience as required by NSW Waterways, or evidence of experience as a deck hand or general purpose hand in commercial vessels as required by NSW Waterways.
Note: If a student entering this course via the latter pathway has not completed training equivalent to the Elements of Shipboard Safety, specified in Schedule 3 of Section 2 of the Uniform Shipping Laws Code, then the Group 2 modules of this course should be completed before doing practical training onboard a vessel. It is anticipated that very few participants will be in this situation.
| Competency Units | |
| TDMMA1101A | Maintain the stability of a vessel using basic stability information |
| TDMMB101B | Perform routine remedial, preventative and survey deck maintenance on a vessel |
| TDMMB601A | Monitor condition and seaworthiness of a small vessel |
| TDMMB701A | Slip vessel and maintain hull |
| TDMMC1001B | Steer a domestic vessel under the direction of the master or officer in charge of the watch |
| TDMMC701B | Apply seamanship skills and techniques when operating a small domestic vessel |
| TDMMC801A | Manoeuvre a vessel less than 24 metres in length within inshore limits |
| TDMME101A | Understand orders and be understood in relation to shipboard duties |
| TDMME501A | Transmit and receive information by marine radio or telephone |
| TDMMF1001A | Provide first aid |
| TDMMF1101A | Survive at sea in the event of vessel abandonment |
| TDMMF1201A | Minimise the risk of fire and maintain a state of readiness to respond to emergency situations invol |
| TDMMF201A | Respond to navigational emergencies |
| TDMMF3201B | Apply domestic regulations when operating a small vessel |
| TDMMF4702A | Contribute to maintaining a safe watch on a domestic vessel |
| TDMMF5302A | Fight and extinguish fires on board a small vessel |
| TDMMF701B | Observe safe working practices and procedures on board a vessel |
| TDMMF801B | Comply with emergency procedures on board a vessel |
| TDMMH1102A | Use radar to maintain safe navigation |
| TDMMH1302A | Apply weather information when navigating a small vessel |
| TDMMH801A | Plan and navigate an inshore passage |
| TDMML201A | Contribute to effective human relationships on board a vessel |
| TDMMR101A | Operate and maintain steering gear arrangements |
| TDMMR201A | Use and maintain deck equipment and machinery |
| TDMMR301A | Operate fuel, fresh and ballast water, bilge and fire pumping systems installed in a vessel |
| TDMMR5402A | Carry out refuelling and fuel transfer operations |
| TDMMR5502A | Perform rigging and lifting operations on board a small domestic vessel |
| TDMMU502A | Ensure compliance with environmental considerations in a small domestic vessel |
Semester 1, 2008:
Campuses:
Ballina - Master Class V course. Flexible delivery. Contact Rhett Turner on (02) 6681 8931.
Port Macquarie - Flexible delivery with attendance at workshops and phone-in sessions. Contact Geoff Shelton on (02) 6581 6229.
This course will be replaced by TDM30407 Certificate III in Transport and Distribution (Coastal Maritime Operations - Master Class 5), TAFE NSW course no: 17448.
